Recent Articles
32-Channel RS485 NC/NO lift controller Installation
Premise This configuration guide will describe how to configure and wire the 32-Channel RS485 NC/NO lift controller with the NEO ACR V2 Specifications Relay output parameters Refer to the following table according to different brands and different ...
Programming a Platinum Lock to your Lock-S System
Instructions The process of programming a Platinum Lock to your Lock-S system is very similar to the process you normally would go through in order to program a new door. Step 1 - Firmware Cards (If received): If you received Firmware Cards along ...
Install SQL Server for Lock-S on computers purchased after September 2025
Premise This guide is intended for computers purchased after September 2025 as they are not compatible with the previous version of SQL Server 2012 The first step when installing Lock-S software is to install the server. Follow the steps below. If ...
Scheduling Keys
Premise This documentation will explain how to schedule keys using the "Frequency" function in KAS Access It will allow you to have a key for a particular user active on a certain schedule. Examples: Example 1: "MaintenanceUser" needs access to ...
Mechanical Troubleshooting
Premise In the event of a suspected mechanical failure, you could check that the internal mechanism is triggering as intended. This is only done when a lock is accepting a card (green light, single beep), but is not unlocking the door. Note: This ...
Support on Hardware and Software