Access Control - How To Wire With A Mag Lock

Mag Lock Wiring Diagram

Standard wiring diagram for a bolt or Electric Strike

• Related Articles

• Neo ACR & Neo Cloud Lock - User Guide for Local Management

  Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...

• Lock-S Manual / User Guide

  KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

• Neo Access Control - Installation & Specifications

  Introduction The HAR300 Access Control is most commonly installed in common areas/gates/front doors for accommodation sites. This unit can also be used in conjunction with the Lock-S lift control system as the ID reader. Supporting technologies ...

• Lock-S Lift Control

  Designate card access to assigned floors Specifications  Wiring Diagram ​ Function Guest cards can only access the permitted floors by swiping the card. Example: If the room is on the third floor, the guest can only reach the third floor. When ...

• Universal (Adel) Access Control - Program an Adel Access Control or Universal Lock as a Common Door

  Instructions Issue the appropriate cards from the software for the Access Control you want to program. If you need to program room door Click Here The correct cards must be created from the software before you can begin programming the Access ...