User Guide
Programming a Platinum Lock to your Lock-S System
Instructions The process of programming a Platinum Lock to your Lock-S system is very similar to the process you normally would go through in order to program a new door. Step 1 - Firmware Cards (If received): If you received Firmware Cards along ...
Mechanical Troubleshooting
Premise In the event of a suspected mechanical failure, you could check that the internal mechanism is triggering as intended. This is only done when a lock is accepting a card (green light, single beep), but is not unlocking the door. Note: This ...
LMS Platinum to Lock-S Platinum (Upgrade Kit)
Before you start Please watch the entire video before performing the upgrade. If you have any questions or concerns please contact us first. https://drive.google.com/file/d/19OM6ddQU7UI4jA2ohdZ4I0fAbwpgudLa/view?usp=sharing Tools You will need the ...
Platinum Lock - Factory Reset
By System Card Locate the original System Card used to initially program the door. Note: you cannot use the PDA. Swipe the System Card once -> Red LED with rising tone Swipe the System card again -> Green LED with a single beep The lock is now ...
Lock-S Platinum Locks - Changing Batteries