Lock-S - Remote Functionality with Gateways

Lock-S - Remote Functionality with Gateways

Premise

This guide will talk you through how to connect your Lock-S locks to a gateway and remote control them via the Lock Keeper app.

Prerequisites

  1. Remote Access license (obtained from KAS)
  2. Lock Keeper App
  3. iPMS server installed and configured as per the Lock-S instructions
  4. At least one gateway
Download the Lock keeper app from the following link


Login Using Lock-S Managers Account

APP Account details can be found in Lock-S Software by ‘System’>’System Parameters’>’APP’
Notes
The APP Account is not editable as it is assigned to each software license.


Connect a gateway via the app




Gateway Configuration Video




Remote Functionality

Remote Set Clock


Remote Erase Card


Remote Read Records


Remote Unlock








    • Related Articles

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

    • Lock-S - Synchronizing Databases with a second computer

      Premise This guide will provide the basic instructions on how to set up a secondary computer and have it access the same Lock-S database as the main computer. Prerequisites Main computer fully configured and installed as per the instructions in this ...

    • Lock-S Integration - Cloudbeds Setup

      KAS Lock-S Software is a PC Software which allows you effortless control of your electronic lock system in your property. Beta Disclaimer: KAS Integration ToolKit is currently under active development. The Beta labeling implies that while the core ...

    • ETouch Lock - Program/Delete Remote Controller to the Lock

      How to Add a remote controller Tap the keypad and press the following: * 1 2 3 1 2 3 * 6 * a BLUE or GREEN LED emits and now entered into remote controller programming mode. Press the button once on the remote controller to program. You will get a ...