Power Cycle NEO lock/ACR, Platinum lock, Gateway
Power Cycle NEO Lock
1) Take only one battery out from the back.
2) Put your palm or four fingers and hold it on the keypad/face of the lock.
3) Now put the battery back in while holding the palm/fingers on the face.
4) Let go palm/fingers from the lock.
Please make sure you set the clock of the lock after doing the power cycle on the lock. Click here
Power Cycle NEO ACR
1) Power off, the NEO ACR.
2) Wait for at least 30 seconds.
3) Power the ACR back on.
Please make sure you set the clock of the ACR after doing the power cycle on the ACR. Click here
Power Cycle Gateway
1) Power the gateway Off
2) Wait for 15-20 seconds.
3) Power the gateway on.
Power Cycle Platinum Lock
1) Take the battery compartment out of the lock.
2) Wait for 1 minute.
3) Put the battery compartment back in.
Please Make sure you set the clock of the lock after doing the power cycle on the lock. Click here
Related Articles
Neo ACR & Neo Cloud Lock - User Guide for Local Management
Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...Lock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...KASAccess - Lock & Gateway Activation
KASAccess Mobile App & Web Console Gen 2 Prerequisite - Account Registration Please Note: In order to use KASAccess, you will require a new web console account. Account registration for KASAccess is completed via our KAS Support team. Please email ...Neo ACR & Neo Cloud Lock - Factory Hard Reset
Hard Reset NEO Lock 1) Power up the lock by Connecting the Front handle to the rear handle using the white cable. 2) Press and hold that button on the back of the lock as shown in fig for 3-5 seconds until you hear sound. ...Neo ACR & Neo Cloud Lock - Factory Hard Reset
Hard Reset NEO Lock 1) Power up the lock by Connecting the Front handle to the rear handle using the white cable. 2) Press and hold that button on the back of the lock as shown in fig for 3-5 seconds until you hear sound. ...