Lock-S Software - How to Change the relay 'Unlock' Time on Locks & Access Controls
Follow this guide to modify the unlocking time for your lock.
Note: you must have the following firmware/software versions on all your devices:
- Lock-S Software: V12.3n
- Platinum: V9.9
- Neo: V6.2
- HAR200 / HAR302: V10.0
If you need to upgrade any of your devices, contact KAS to find out how.
You can check the current firmware version of your device by using the PDA and download the query logs from the device.
You can only do this using a Parameter Card.
Step 1: Create a Parameter Card with the signal time option:
Note: signal time is adjusted in half seconds eg Signal Time: 6 = 3 seconds
Step 2: Swipe Parameter Card on the device
- 1 Green Beep – Setting Successful
- 2 Red Beeps – Wrong software or device has not been programmed using the PDA or System Card yet.
Step 3: Test with Master card
- Test with Master card (or any card) to ensure the desired time setting is correct.
HELP: The device has not changed the unlocking time.
Related Articles
Lock-S Manual / User Guide
KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
Lock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
Neo ACR & Neo Cloud Lock - User Guide for Local Management
Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...
LMS Software - User Manual
Full User Manual and Quick Reference Guide
Universal (Adel) Lock - Full Software Manual
Please click attached file to download.