Related Articles
ETouch Lock - Update Firmware for KAS App
Instruction Download PDF Here Follow instructions carefully. You will need to download a third-party app. Firmware update directly from KAS app is coming soon. Thanks for your support. Firmware files available: Production kas_lock_dfu_v1.1.5 – ...
Firmware - Update Node Firmware using Lockkeeper APP for lock-S Clients
Only follow this guide when instructed by KAS. If you do this without KAS instruction, you may experience unknown behaviors. Step 1: Obtain your manage account details: Go to Lock-S Software System > System Parameters > APP Take note of the app ...
Update S1 node Firmware using lockkeeper App for Console Clients
Please Note: Pincodes and RFID Cards from the Console will be removed when you reset the lock and will have to be added again after the lock is re-activated back to your Console account however, the data history records for the lock will be retained ...
Update BYD Firmware
Process for updating BYD firmware is as follows (See Video Attached) : 1) Connect the 4 pin Dupont cable to the Programmer with the brown wire towards the bottom of the programmer. 2) Disconnect the lock from the battery side of the lock. 3) Remove ...
Update PIR Firmware with SKTools
THis process will udpate a PIR to enable all messages to be uninterpreted. First download and install SKTools V0.1.02 (attached) Connect the USB to RS485 to the Purple cable Far right) and Brown (second from right) . Find out the COM port allocated ...