AKM and AKE Access controls - Differences

AKM and AKE Access controls - Differences

AKM is the B6K type keypad. The manuals for AKM models and frequencies are the same.

AKE is the W3-M or W3-C type keypad for Mifare and RFID (EM) respectively. The manuals for all AKE models and frequencies are the same.

    • Related Articles

    • Neo ACR & Neo Cloud Lock - User Guide for Local Management

      Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...
    • AKE-100/AKE-300 Setup Tips – Getting Started

       Key Tips: Default management mode code: 888888 Flashing RED LED is the normal mode. Solid RED LED is the management mode. Green LED flashes and relay fires when code/card is correct (or REX button grounded) Follow the below setups to get up and ...
    • Lock-S Software - How to Change the relay 'Unlock' Time on Locks & Access Controls

      Follow this guide to modify the unlocking time for your lock. Note: you must have the following firmware/software versions on all your devices: Lock-S Software: V12.3n Platinum: V9.9 Neo: V6.2 HAR200 / HAR302: V10.0 If you need to upgrade any of your ...
    • Neo Access Control - Installation & Specifications

      Introduction The HAR300 Access Control is most commonly installed in common areas/gates/front doors for accommodation sites. This unit can also be used in conjunction with the Lock-S lift control system as the ID reader. Supporting technologies ...
    • LMS - Access Control in Free Passage Mode

      Step # 1: Issue ACR Control Card by clicking on system settings >> Issue ACR Control Card Step # 2: Now set the parameters according to your requirement and click issue ACR card. Step # 3: Now Tap the issued ACR card on the access control and your ...