Neo Lock (Face) - “The administrator has not added any contents” message on the Neo Face lock

Neo Lock (Face) - “The administrator has not added any contents” message on the Neo Face lock

INFO

If this message is shown on a new NEO face lock or a lock after it has been factory reset, the message is indicating

that there has not been any authentication parameters set for the Admin user, once enrolling a Pin, Face or RFID tag for

the Admin user the message won’t appear again.


You will need to set a Pin code for the Admin user.

Video


    • Related Articles

    • Neo ACR & Neo Cloud Lock - User Guide for Local Management

      Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...
    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • Neo Cloud Lock - Fire Certificates

      Neo Cloud Lock holds the following fire certificates.  KAS recommends you speak to your certifier and supplying them with the relevant certificates before purchasing any hardware  TUBULAR LATCH E-Core Pyropanel Firecore MORTICE LATCH E-Core Pyropanel ...
    • Neo Cloud Lock - Drilling Template

      See PDF Attached Please ensure you verify the dimensions after printing and scale accordingly to ensure the printer maintains the scale. This template is suitable for Neo Face Lock Neo Fingerprint