LMS Software - Installation Setup
If you are Reinstalling the software please backup your database first
- After Installing the LMS software, copy the KAS-LMS (patch) file from the above link and paste into the lock software's directory usually (C:\\program files (86) \\ KAS)
- Now rename KAS-LMS as KAS-LMS.old and rename the patch one as KAS-LMS
- Now copy the old access database named as RF2008.mdb and paste in the same folder to restore the existing database (Please check your virtual store as well)
Related Articles
LMS Software - User Manual
Full User Manual and Quick Reference GuideLock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...LMS Access Control System - Installation Guide
To setup and program the access control reader There are 2 main components of the Access Control System (ACS) which you some become familiar with. There are also additional optional devices that comprise the ACS, a door release and the REX button. ...ETouch Lock - Installation & Setup
Installation and Setup Lineation Select your lock height, and place a marking on the door where you want the lock to sit From this marking, measure out the back set (60mm or 70mm provided with lock) Measure out the other markings required that are ...LMS Software - How to view the Programming Reference Number
Before editing any fields in the table, ensure a backup is taken. If a mistake is made there is no way of 'undoing' something. This may involve reprogramming ever room and every card. How to take a back up of LMS on a local computer - CLICK HERE ...