Install SQL Server for Lock-S

Install SQL Server for Lock-S


The first step when installing Lock-S software is to install the server. Follow the steps below. If you get stuck, free support is available during Business Hours 

Step # 1 Download SQL

  1. Click on the URL to Download the SQL setup file.  SQL Server 2012
  2. Select Language and Click Download. You will be prompted to select the file now.



Step #2 Select the file to download

Most computers these days have an x86 processors, however, some may have be x64. If you know the process select accordingly. 
If you don't know the processor try selecting 86 first. If this is incorrect it will notify you. then you can choose x64
  1. For x86 Select:  ENU\x86\SQLEXPRWT_x86_ENU.ex click Next. The download should start automatically. For x64 processor:
  2. For x64 Select: ENU\x64\SQLEXPRWT_x64_ENU.exe and click Next. The download should start automatically. For x64 processor:

Step # 4 Install SQL

1. After the file has downloaded. Open the folder where you download the file and double click on it to start installing the SQL.

2. Click on:  New SQL Server stand-alone installation.




After clicking next, SQL will automatically check for updates. After finish updating click next 



Step # 6 Accept Licence Terms


Click on the box to accept the license term and press next again.



Step # 7 Instance Configration

Now Keep clicking next until you see the following Screen.



Step # 8 Name the Instance


  1. Change Instance Name: KASDB
  2. Instance I.D: KASDB
  3. Keep clicking next until you reach Database Engine Configuration



Step # 9 Database Engine Configuration

Server Configuration 
  1. Authentication Mode: Mixed Mode
  2. Password: kas123
  3. Keep clicking next until you reach the Complete page. 



Step # 10 Install Complete


    • Related Articles

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Identify Port used by SQL Server Database Engine Using SQL Server Configuration Manager

      These instructions will help identify what port SQL is using 1. Click Start -> Programs -> Microsoft SQL Server 2008 -> Configuration Tools -> SQL Server Configuration Manager 2. In SQL Server Configuration Manager, expand SQL Server Network ...

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

    • Connecting to the SQL Server from the different computer

      Before connecting  make sure your local computer (where lock-S software is installed) and your Server computer (where your SQL database is installed) are both on the same network. Step # 1: Double click on the lock-s software and you will see the ...

    • Lock-S Software - Installing on your Computer

      Step # 1 SQL has been installed You must already have installed SQL Server 2012. If you have not done so please click here to complete the steps first Step # 2 Download Lock-S Software Download the zip file in the footer of this document. Once the ...