ETouch Lock - Unlock using RFID Keycards or FOBs

ETouch Lock - Unlock using RFID Keycards or FOBs

Unlock with RFID key cards or Fobs

The E Touch Bluetooth Lock can be unlocked using RFID key cards or Fobs. It does not have the RFID antenna ON when the door is in standby.  You have to touch the keypad to wake up the lock out of standby.

Conduct the following steps to unlock the door using RFID:

      1)  Wake up the lock by using your palm.

      2)  This will turn the blue LED keypad on.

      3)  Press the '#' button

      4)  Present your RFID tag to the lock within 3 seconds.

      5)  After 3 seconds the lock will return the standby.

VIdeo






    • Related Articles

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • ETouch Lock - Program or Delete an RFID Card/FOB

      How to Add a RFID key card or FOB Conduct the following steps to enrol RFID key cards or FOBs to the lock.  You can enrol up to 80 RFID keycards or FOBs.  Assume master programming code is default: 123123. If you do not need to replace individual ...
    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • ETouch Lock - Can I Manage the Lock using Two Admin Accounts?

      You can only manage the eTouch lock using one admin account. Also if you have activated the lock on one admin, you do not need to activate the lock again on another phone. You only need to activate the lock once. If you think having multiple admin ...
    • ETouch Lock - Series 820~850 Cheat Sheet

      Programming Guide This article is a compacted user guide. Please see full manual for further instructions and information Notes: To wake the etouch series lock you need to tap (wake up) the LED display with the palm of your hand. *[MANAGEMENT PIN ...