Universal (Adel) Lock - Set The Clock

Universal (Adel) Lock - Set The Clock

Create a clock card form the LMS ADEL software.

      1) Select ISSUE

      2) Select Clock Card *if clock card is not displayed in the drop-down menu please speak to management or contact "KAS"

      3) Select OK

      4) Place the card over each lock face to set the time

            (This takes the exact time of your computer at the time of encoding. If you are not going to set the clocks immediately, then we suggest moving the time forward or creating the card at a later date.

      5) Once you have set the clock on all your locks, delete the card
      
            a) Insert the clock card into the encoder
      
            b) Select OPERATION
      
            c) Select READ
      
            d) Select ERASE. This is now a blank card.

A Clock card is used to set the clock inside a Lock or Access Control. We recommend updating the clocks on your locks around every 6 month.

A Clock Card will record the time on your computer at the actual time of encoding this card (or as otherwise nominated in your software), so if you are programming a large group of rooms – then they should be programmed in sections, or if you have a distance to travel to your rooms to update their clocks – then you can preset the time that you will actually update your locks clocks

Any normal Mifare card can be used as a Clock card and re-used again as any other normally encoded card
Clock Cards will not gain access to any rooms

    • Related Articles

    • Universal (Adel) Lock - Full Software Manual

      Please click attached file to download.

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Universal (Adel) Lock - Program as a Room Door

      Instructions please use the following instructions If you need to program an Access Control or Common Door. CLICK HERE When programming a lock the following cards must be issued from the software and taped to the door in this specific order. Create ...

    • Universal (Adel) Access Control - Program an Adel Access Control or Universal Lock as a Common Door

      Instructions Issue the appropriate cards from the software for the Access Control you want to program. If you need to program room door Click Here The correct cards must be created from the software before you can begin programming the Access ...

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...