how to put the lock in free passage mode

how to put the lock in free passage mode


    • Related Articles

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • How to program a lock to in Free Passage mode within a set Time Window

      How to program a lock to remain in Free Passage mode (Unlocked) within a set Time Window This function can be applied to all doors. Tick the "Auto Time" box Select the start time, this is the time that the lock will change to a unlocked state Select ...
    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • LMS - Access Control in Free Passage Mode

      Step # 1: Issue ACR Control Card by clicking on system settings >> Issue ACR Control Card Step # 2: Now set the parameters according to your requirement and click issue ACR card. Step # 3: Now Tap the issued ACR card on the access control and your ...
    • Platinum Lock (SAL) - User Guide

      Preface The SAL Platinum electronic lock is a standalone card operated lock. It does not require any software or supporting hardware to operate. OPERATIONS The unlocking modes available;   RFID Mifare S50 1K Mechanical Key for emergency access or ...