Lock-S Software - How to checkout a guest card

Lock-S Software - How to checkout a guest card


    • Related Articles

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • Lock-S Software - Revoking a guest card and Deleting it

      Removing a Guest from the system involves 2 main following Steps "Deleting from the lock" and "deleting from the Software". Since, there is no direct communication between the locks, you would need to tell both the lock and Software individually that ...
    • Lock-S Software - Difference between New Key, Duplicate Key and Add Key – First Card, Other Card

      Program one card per room Generally, you should follow this method: Program one card per room and any additional cards select 'Duplicate'. New Key:  Issue this card to invalidate all previous Guest cards Duplicate Key:  Issue this card to take the ...
    • Lock-S Software - How to set the CLOCK by RFID Card

      Issuing a CLOCK card Open Lock-S Software Go to Clock Card under Setting Cards Put a blank card on the card encoder Click Issue Swipe the Clock card on the lock once. Tips: Ensure the time you have programmed onto the clock card is the same as the ...