Neo Access Control - Installation & Specifications

Neo Access Control - Installation & Specifications



        

Introduction

The HAR300 Access Control is most commonly installed in common areas/gates/front doors for accommodation sites.
This unit can also be used in conjunction with the Lock-S lift control system as the ID reader.

Supporting technologies including:
  1. RFID Cards & Fob Access
  2. Smartphone App Access
  3. Online Control & Management via S1 Gateway
  4. Keypad Pin Code access.

Images

            

Dimensions



Height: 115mm

Width: 40mm

Depth: 25.6mm

Weight: approx. 150g



HAR300 Display when the 

Keypad is disabled




Technical Specification


HAR310

HAR311

Power

12 V DC / 2A

9 V DC / 2A

Rated Current

Max. 100 mA

Max. 100 mA

Door Sensor input

Dry contact

Dry contact

Exit button input

Dry Contact

Dry Contact

Relay rated voltage

12 V DC

9 V DC

Relay rated power

0.2 W

0.2 W

Relay output

COM, NO, NC Dry contact

COM, NO, NC Dry contact

Relay contact
impedance

Max. 100 m??

Max. 100 m??

Relay contact

capacity

24 V DC, Can pass 2 amps current

24 V DC, Can pass 2 amps current

Relay electrical life

2 A / 24 V DC. over 100,000 times electrical life 

2 A / 24 V DC. over 100,000 times electrical life 

RFID

ISO 14443 A

ISO 14443 A


RFID frequency

13.56 MHz

13.56 MHz



Wiring Diagram




Installation 

  1. Cat-5 or Cat-6 cables is a suitable wire type for the ACR Power (Red, Black), REX switch (Grey, Blue), and NO, COM, NC wires (Yellow, White, Green) if using the relay as a dry contact or to switch a low powered electric strike (12V DC ~ 1A).
  2. If using a high power electric strike or high-powered electromagnetic lock, wire a figure 8 cable (or equivalent) between the power supply and the electric strike or electromagnetic lock.
  3. Max length for a Cat-5 cable between the Power Supply and ACR reader unit: 50 m
  4. Keypad ACR is fully waterproof and is compatible to install outdoors in direct exposure of rain.
  5. Power supply is not supplied with this product.

Gateway Connectivity

The HAR300 can receive online/internet control if a Gateway is activated in close proximity.
The Gateway and HAR300 will automatically discover and establish an online connection.













    • Related Articles

    • Neo ACR & Neo Cloud Lock - User Guide for Local Management

      Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...
    • LMS Access Control System - Installation Guide

      To setup and program the access control reader ​ There are 2 main components of the Access Control System (ACS) which you some become familiar with.  There are also additional optional devices that comprise the ACS, a door release and the REX button. ...
    • Neo Cloud Lock - Specifications

      Introduction The Neo is a modern lock that appeals to the modern environment. It is a feature rich and durable lock hardware perfectly suitable to any type of accommodation site. Supports the latest technologies including: RFID technology Mobile ...
    • LMS Access Controller System - Specifications & Wiring Diagram

      Components This product contains 240V AC. Copyrights Information in this document is subject to change without further notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any ...
    • Energy Saving Device ESD950 - Installation & Specifications

      Energy Saving Device (ESD) Datasheet Note for Installers : Updates to wiring requirements for Air Conditioners For those who have previously used our ESD 910, 920s, or 930s, you should be aware that installation standards have changed. As a result, ...