Neo Cloud Lock - Low Battery Warning Notification

Neo Cloud Lock - Low Battery Warning Notification

When the batteries are going flat the lock will show a notifications for this after you unlock the lock.
eg. enter <correct pin code> then <notification will display>

Good Battery: Green 7

  1. This signifies that the batteries are good

Low Battery Notification: GREEN '7' + RED '9'

  1. This signifies that the batteries low and need replacing. 
  2. Approximately 60 uses remaining before batteries die
  3. When the batteries are V4.8 or below, a red '9' will be lit after each entry. 

Low Battery Warning: GREEN '7' + RED '9' + Tone​​​

  1. This signifies that the batteries urgently need replacing. 
  2. Approximately 20 uses remaining before batteries die
  3. When the batteries are V4.6 or below, a red '9' will be lit and a 'tone' will be heard after each entry.

Critical Low Battery Warning: All numbers flashing at the same time

  1. This signifies that the batteries urgently need replacing.

  2. Batteries immediately needs to be changed 


The Lock does not wake or function: Batteries are dead

  1. Lock will stop working.
  2. Minimum working voltage ~V4.3. 
When changing the batteries, the clock must be set or 'auto generated' codes will not work

Low battery notification  Video






    • Related Articles

    • Neo ACR & Neo Cloud Lock - User Guide for Local Management

      Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...
    • Neo Cloud Lock - Specifications

      Introduction The Neo is a modern lock that appeals to the modern environment. It is a feature rich and durable lock hardware perfectly suitable to any type of accommodation site. Supports the latest technologies including: RFID technology Mobile ...
    • Neo Cloud Lock - Hardware Installation Guide

      Preface Electronic locks are sensitive and advanced products with fragile microchips and hardware. Please be aware that the position and type of environment the lock is installed in can affect its lifespan. To install the lock, we recommend ...
    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • Neo Cloud Lock - Error 'all numbers flashing'

      All numbers flashing on a NEO lock is a sign of critical low battery, please try changing the batteries to a new one and try again, if the problem persist please email to support at support@kas.com.au Please Click here for more info. ​