General
KASecurity 5572 Legacy Lock Manual / Guide
Update PIR Firmware with SKTools
THis process will udpate a PIR to enable all messages to be uninterpreted. First download and install SKTools V0.1.02 (attached) Connect the USB to RS485 to the Purple cable Far right) and Brown (second from right) . Find out the COM port allocated ...
Update BYD Firmware
Process for updating BYD firmware is as follows (See Video Attached) : 1) Connect the 4 pin Dupont cable to the Programmer with the brown wire towards the bottom of the programmer. 2) Disconnect the lock from the battery side of the lock. 3) Remove ...
Neo Cloud Lock/ACR - Demonstration
Preface This demonstration KAS Lock has been programmed with the following access credentials: Pin code Wake up the keypad by touching the keypad (using the back of your hand) Press 1234# RFID Cards and FOBs Move the RFID Card or Fob towards the ...
Standalone Mode vs Hotel Mode - NEO Lock/ACR
Function Description Table
To download a PDF, Please see the attachment present on the bottom of this article. KAS - Keyless Access Security - Function Descriptions Functions Standalone (Offline) KASaccess Console (Cloud-based System) Lock-S (Reception Software System) OFFLINE ...
Power Cycle NEO lock/ACR, Platinum lock, Gateway
Power Cycle NEO Lock 1) Take only one battery out from the back. 2) Put your palm or four fingers and hold it on the keypad/face of the lock. 3) Now put the battery back in while holding the palm/fingers on the face. 4) Let go palm/fingers from the ...
Certificate of Currency
Attached is the most recent copy of the Certificate of currency.
RFID Card Printing - Specifications & Requirements
So we can achieve the best result for your request with the fastest turn around possible, please read all information below. Any changes after submission may result in further charges. Minimum Artwork Requirements Unfortunately we are not designers ...
How to confirm the handle orientation
Lock Handle Orientation For some Locks the orientation is required. Please use this diagram to confirm your requirements
Warranty Claims
Warranty Terms & Conditions A link to the full Warranty Terms and conditions have been included in this article. Please click the heading. Procedure Please ensure you read the Warranty Terms and Warranty Procedure completely before you proceed with ...