Platinum Lock (SAL) - Video on how to add cards

Platinum Lock (SAL) - Video on how to add cards


    • Related Articles

    • Platinum Lock (SAL) - User Guide

      Preface The SAL Platinum electronic lock is a standalone card operated lock. It does not require any software or supporting hardware to operate. OPERATIONS The unlocking modes available;   RFID Mifare S50 1K Mechanical Key for emergency access or ...
    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • Platinum Lock (SAL) - Installation

    • Platinum Lock (LMS) - Hardware Installation Video

                        1) By default, the lock is permanently in an unlocked (“open”) state. This is factory default, which means the installer can never lock himself/herself out whilst installing. 2) Remove all existing door hardware and cut the door to ...