Lock-S Software - Revoking a guest card and Deleting it

Lock-S Software - Revoking a guest card and Deleting it

Removing a Guest from the system involves 2 main following Steps "Deleting from the lock" and "deleting from the Software". Since, there is no direct communication between the locks, you would need to tell both the lock and Software individually that the card has been revoked.

STEP # 1 Deleting From the Lock

1) Create an Erase Card Click Here 

2 Present the card on the face of the lock

Video




STEP # 2 Deleting From the System

1) From the Menu Bar Click Card >> Lost and Damaged



4) Select the card type: (e.g Guest Card) and click Refresh



6) Select the Guest Card and click Lost.

Please make sure you do this After you have deleted the guest card from the lock first.



VIDEO





    • Related Articles

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Lock-S Software - How to Generate Offline Password

      Video Notes Every time you create a new offline pin code for a room, it will invalidate the previous offline pin code. This means you can only have ONE offline pin code working at one time. When setting the parameters, take note of the ‘Check-in ...

    • Lock-S Software - Difference between New Key, Duplicate Key and Add Key – First Card, Other Card

      Program one card per room Generally, you should follow this method: Program one card per room and any additional cards select 'Duplicate'. New Key:  Issue this card to invalidate all previous Guest cards Duplicate Key:  Issue this card to take the ...

    • Lock-S Software - How to set the CLOCK by RFID Card

      Issuing a CLOCK card Open Lock-S Software Go to Clock Card under Setting Cards Put a blank card on the card encoder Click Issue Swipe the Clock card on the lock once. Tips: Ensure the time you have programmed onto the clock card is the same as the ...