Replacing the Batteries

Replacing the Batteries

Replacing the Batteries

Batteries are recommended be replaced every 12 months. [Figure 11.3 on User Manual]

Replacing batteries will not loose any stored data

    1. Remove battery cover by sliding it upward
    2. Remove old batteries and replace with new ones
    3. Replace battery cover

NOTE: Must use high quality 4 x AAA alkaline batteries.


    • Related Articles

    • Lock-S Platinum Locks - Changing Batteries

    • Neo Cloud Lock - Hardware Installation Guide

      Preface Electronic locks are sensitive and advanced products with fragile microchips and hardware. Please be aware that the position and type of environment the lock is installed in can affect its lifespan. To install the lock, we recommend ...
    • Platinum Lock (SAL) - User Guide

      Preface The SAL Platinum electronic lock is a standalone card operated lock. It does not require any software or supporting hardware to operate. OPERATIONS The unlocking modes available;   RFID Mifare S50 1K Mechanical Key for emergency access or ...
    • Platinum Lock - Low Battery Alert

      If you hear a long beep after you tap a card as shown below, it means your lock have weak batteries and needs to be changed immediately before the lock is completely dead. VIDEO
    • Keypad will not light up after touch

      Ensure the following to wake up keypad: Batteries are inserted with correct orientation Batteries are new and not flat Use your palm - 3 or more fingers and cover a large area of the keypad - you cannot wake up the keypad successfully with only 1 ...