Neo Cloud Lock/ACR - Demonstration
Preface
This demonstration KAS Lock has been programmed with the following access credentials:
Pin code
- Wake up the keypad by touching the keypad (using the back of your hand)
- Press 1234#
RFID Cards and FOBs
- Move the RFID Card or Fob towards the centre of the lock face
Mobile Phone using BLE (Bluetooth technology)
- Download and Install the "KAS Cloud App" using the following QR codes
- Sign in using the your credentials
- Within bluetooth range, slide the Unlock button on your mobile phone
Remote Unlock from anywhere using your Mobile Phone or from KAS Cloud Web Console
From Mobile Phone:
- Select the lock on your mobile Phone
- Select: "Remote Unlock
From KAS Cloud Web Console:
- Select the lock on your KAS Cloud Web Console account https://console.kas.com.au/
- Log in with your credentials
- Select the lok and select "Unlock"
Local/Online Operation
Programming can be completed locally at the lock or via the mobile app or web console.
Pin Code
Specifications
- Capacity: 100
- Pin ID: Each user pin code has an assigned ID number.
- ID range: 00 - 99 [2 digits]
- User code length: 4-6 digits
Unlock the door by pin code
- Touch lock to wake up the keypad,
- Enter pin code [4-6] digits,
- Press ‘#’, Door will unlock.
Example: 1 2 3 4 5 6 #
Example: 2 3 4 5 #
RFID Card & Fob
This will add the RFID Card or FOB to access the door lock.
Specification
- Capacity: 100
- Frequency: Mifare S50 1k 13.56MHz
- Each User RFID Card has an assigned ID number. ID range: 00 - 99 [2 digits]
Unlock the door by RFID card or Fob
- Swiping the card over the lock face
- Door will unlock
Related Articles
Neo ACR & Neo Cloud Lock - User Guide for Local Management
Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...
Lock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
Neo ACR & Neo Cloud Lock - Factory Hard Reset
Hard Reset NEO Lock 1) Power up the lock by Connecting the Front handle to the rear handle using the white cable. 2) Press and hold that button on the back of the lock as shown in fig for 3-5 seconds until you hear sound. ...
Neo ACR & Neo Cloud Lock - Factory Hard Reset
Hard Reset NEO Lock 1) Power up the lock by Connecting the Front handle to the rear handle using the white cable. 2) Press and hold that button on the back of the lock as shown in fig for 3-5 seconds until you hear sound. ...
Neo Cloud Lock - Fire Certificates
Neo Cloud Lock holds the following fire certificates. KAS recommends you speak to your certifier and supplying them with the relevant certificates before purchasing any hardware TUBULAR LATCH E-Core Pyropanel Firecore MORTICE LATCH E-Core Pyropanel ...