NEO ACR - Connect 2 ACR with one locking system (electric strike or mag lock)

• Related Articles

• Neo ACR & Neo Cloud Lock - User Guide for Local Management

  Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...

• Lock-S Software Neo - Factory Reset

  These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

• Lock-S Manual / User Guide

  KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

• Neo ACR & Neo Cloud Lock - Factory Hard Reset

  Hard Reset NEO Lock 1) Power up the lock by Connecting the Front handle to the rear handle using the white cable.        2) Press and hold that button on the back of the lock as shown in fig for 3-5 seconds until you hear sound.                 ...

• Neo ACR & Neo Cloud Lock - Factory Hard Reset

  Hard Reset NEO Lock 1) Power up the lock by Connecting the Front handle to the rear handle using the white cable.        2) Press and hold that button on the back of the lock as shown in fig for 3-5 seconds until you hear sound.                 ...