Migration of the Locks/ACR's from KAS Cloud App to Kasaccess App

Migration of the Locks/ACR's from KAS Cloud App to Kasaccess App

1)    Open the KAS Cloud App and login with your “Admin” account credentials.


2)    Click on the lock/ACR and then click on the “SS” number that you want to reset and then click on reset. 
NOTE: You can only conduct a reset from the App if you are in the Bluetooth range of the lock/ACR otherwise the Lock/ACR will be greyed out In the App, indicating that you are not in the range


Once it has been successfully reset from the KAS cloud App, the Lock/ACR will now be available to activate from the KASaccess App.
3) Download and Install the App using QR code below.



NOTE: For Apple (IOS) App please download the TestFlight App from the App Store and then download the KASaccess App within the TestFlight App Whereas, for Android App download the .apk file and install as an external source.

For Apple (IOS):

Once TestFlight is downloaded open your email invitation to the KASaccess app and click ‘View in TestFlight’

Now in your TestFlight App, you should be able to download the KASaccess App.


Simply Download the file from QR code above (Step 2.1) and install it.

4) Open the KASaccess App and click on Register and fill in the fields in the form on the next page.


5) Now Login to the KASaccess App using your credentials and Click on the Setup to go to the Device Setup page

 6) After the following screen click on Scan.

 7) After you press scan you will be able to see the list of all the unactivated devices. All the devices broadcasting:

  • “SS” numbers are the unactivated ACR’s

  • “GWS” numbers are unactivated Gateways

  • After activating these devices they will no longer appear in this list

8) Confirm the factory serial number and click the one you want to activate, and press activate as a Lock/ACR, if it is for a room door or click on Activate as Lift.

9) After successfully activating your Lock/ACR you will see the activated successful message.

10) Click OK and press on the Lock tab at the bottom and you would be able to see all activated devices now.

Note: After the activation from KASaccess App, the ACR will automatically migrate to your KAS Cloud Web Console account (See section 5)

11) Now Click on the locks and you would see all your activated devices 

there, click on the “Tap to edit the lock name” and click on “Edit Lock Name” in 

order to rename your lock (e.g, Room 1, Room 2, or 1510 for Storage Sheds)

12) Now you can click on the “unlock” button in your App to unlock the lock in your mobile phone

Note: If the ACR is not in the bluetooth range to the phone, It will grey out in the KAS cloud App, unable to do a BLE (Bluetooth) unlock.

13) Click on the following link to access the web console.
14) Login with the same credentials as you logged in on your mobile app earlier and click on Login.

15) After Logging in you will be able to see the list of the locks that you activated, under “All locks” on the left hand side. 

16) Now Click on the Link Below or click on the Download in the web console for Full User’s Manual.


    • Related Articles

    • Neo Lock/ACR - User Guide Local Management

      Preface Local Management and programming are not required if you are managing access via the app or console. This user guide is for local management only (at the lock face) if you do not have a gateway. Note : Battery operated Neo Locks are not ...
    • KAS Cloud App Hardware Setup

      Setting up the Neo Lock or Access Control Initialisation DO NOT SET UP THE DEVICE UNTIL YOU HAVE INITIALISED THE LOCK TO CLOUD MODE Once you have power to the device, it will broadcast the SS number. The lock is in initialisation mode. You will need ...
    • KAS Cloud App Register

      KAS Cloud Register Setup and activation required from KAS Cloud App before web console access is available Download and Install the KAS cloud App using QR code below.  Click Here for Apple       Click Here for Android   2. Sign in using your ...
    • Lock-S Manual / User Guide

      Part 1 KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned ...
    • Neo Cloud Lock/ACR - Demonstration

      Preface This demonstration KAS Lock has been programmed with the following access credentials: Pin code Wake up the keypad by touching the keypad (using the back of your hand) Press 1234# RFID Cards and FOBs Move the RFID Card or Fob towards the ...