Lock-S - Adding pin code to a NEO
This Option is only applicable if you have the gateways installed and activated
1) Open your lock-s software and right click on the room that you would like to create pin code for and then click on "Online Password".
2) Now enter the name, adjust the validity and hit "Generate".
3) It will automatically generate a number and once you have seen a success on the request, now your pin code will be able to used on the lock.
You can Set the length of the pin code but you can not choose your own pin code.Related Articles
Lock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...ACR / NEO Cloud Lock - Full User Guide
Preface This is a full user guide for local management and lock/ACR functionality customization. When using the mobile app or the web interface, please refer to KAS Access or Web Console A PDF copy of this guide is available as an attachment at the ...ACR / NEO Cloud Lock - Full User Guide
Preface This is a full user guide for local management and lock/ACR functionality customization. When using the mobile app or the web interface, please refer to KAS Access or Web Console A PDF copy of this guide is available as an attachment at the ...Lock-S Manual / User Guide
KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...Lock-S - Synchronizing Databases with a second computer
Premise This guide will provide the basic instructions on how to set up a secondary computer and have it access the same Lock-S database as the main computer. Prerequisites Main computer fully configured and installed as per the instructions in this ...