Lock-S Software - Lock Keeper App Setup

Lock-S Software - Lock Keeper App Setup

Setup Manager App Account

  • Lock Keeper can be used as a “Manager” or “Admin” app when signed in with the “APP Account” field as displayed on the Lock-S Software.
  • APP Account details can be found in Lock-S Software by ‘System’>’System Parameters’>’APP’
  • Note: The APP Account is not editable as it is assigned to each software license.
  • After a successful setup, log out of the “manager” app account and sign in again as a user (using your mobile number).

    Please note: Below it is mentioned that you must match the Lock-S Lock Number to the Lock Keeper "Lock Name". 
    However for common doors only, you must match the Lock-S common door name to the Lock Keeper "Lock Name".














VIDEO





    • Related Articles

    • Lock-S Manual / User Guide

      Part 1 KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned ...
    • Lock-S Software - Gateway Setup

      This article is only for Gateway setup to manage with the Lock-S Software If you are connecting the gateway for cloud/console management please click here Download the Lockkeeper APP from the following link Login Using Lock-S Managers Account APP ...
    • Lock-S Software - Lockkeeper App Management Account Password

      Open your KAS lock-S system Software and click on System >> System Parameters On the next window click on the App This will be your management account username and password
    • Integration - Cloudbeds Setup

      KAS Lock-S Software is a PC Software which allows you effortless control of your electronic lock system in your property.    Beta Disclaimer: KAS Integration ToolKit is currently under active development. The Beta labeling implies that while the core ...
    • KAS Cloud App Hardware Setup

      Setting up your Neo Cloud Lock/NEO ACR (Access Control Reader) DO NOT SET UP THE DEVICE UNTIL YOU HAVE INITIALISED THE LOCK TO CLOUD MODE Once you have power to the device, it will broadcast the SS number. The lock is in initialisation mode. You will ...