LMS - Access Control in Free Passage Mode

Step # 1: Issue ACR Control Card by clicking on system settings >> Issue ACR Control Card

Step # 2: Now set the parameters according to your requirement and click issue ACR card.

Step # 3: Now Tap the issued ACR card on the access control and your settings should automatically be set into the access control.

• Related Articles

• Neo ACR & Neo Cloud Lock - User Guide for Local Management

  Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...

• LMS Access Control System - Installation Guide

  To setup and program the access control reader ​ There are 2 main components of the Access Control System (ACS) which you some become familiar with.  There are also additional optional devices that comprise the ACS, a door release and the REX button. ...

• LMS Lift Control Module - Manual

  Introduction Used in conjunction with the LMS-Software & the LMS-Access Control System The lift control system is used to control the floors the use can access This control can be pre configured and selectable options at the time of checkinn Example ...

• LMS Access Controller System - Specifications & Wiring Diagram

  Components This product contains 240V AC. Copyrights Information in this document is subject to change without further notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any ...

• LMS Software - User Manual

  Full User Manual and Quick Reference Guide