Electric Drop Bolt KLB200 - Installation Instructions

Electric Drop Bolt KLB200 - Installation Instructions

Please see attachment.




    • Related Articles

    • Gateway - Installation

      Installation Gateways need to be installed in locations that can wirelessly communicate to the lock hardware. There are many aspects to consider before installing the gateway which includes the following: location and distances for the best coverage ...
    • Neo Cloud Lock - Hardware Installation Guide

      Preface Electronic locks are sensitive and advanced products with fragile microchips and hardware. Please be aware that the position and type of environment the lock is installed in can affect its lifespan. To install the lock, we recommend ...
    • ETouch Lock - Installation & Setup

      Installation and Setup Lineation Select your lock height, and place a marking on the door where you want the lock to sit From this marking, measure out the back set (60mm or 70mm provided with lock) Measure out the other markings required that are ...
    • Neo Access Control - Installation & Specifications

      Introduction The HAR300 Access Control is most commonly installed in common areas/gates/front doors for accommodation sites. This unit can also be used in conjunction with the Lock-S lift control system as the ID reader. Supporting technologies ...
    • LMS Access Control System - Installation Guide

      To setup and program the access control reader ​ There are 2 main components of the Access Control System (ACS) which you some become familiar with.  There are also additional optional devices that comprise the ACS, a door release and the REX button. ...