LMS Software - How to view the Programming Reference Number

LMS Software - How to view the Programming Reference Number

Before editing any fields in the table, ensure a backup is taken. If a mistake is made there is no way of 'undoing' something.
This may involve reprogramming ever room and every card.

Instructions

  1. Log in to the LMS Software
    2. Ensure your login has 'management rights', please see upper management for login details if you do not have access to perform the following steps
    1. Default Admin Login User ID 99, Password 9999 or 1234. This may have been changed by upper management
  2. Select the drop down menu Room Management
  3. Select Room Number Management
    Room Number Management
  4. When viewing the table, you will be looking for Room Number
    Setting Room Number.png
    1. Building Number: Building the room is located in (usually #1)
    2. Floor Number: Floor the room is located on 
    3. Room Number: Programming Reference number, this is the number you will use to program the door
    4. Room Type: Displays the room type created at setup
    5. Char room: Display the name you see in the software when issuing a card

    • Related Articles

    • LMS Software - User Manual

      Full User Manual and Quick Reference Guide

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

    • Lock-S Program Lock Hardware

      Preface Programming the lock hardware can be completed by either of these 2 methods. Via cards or using the PDA These instructions for the Platinum Lock, Neo Lock and Access Controls on the Lock-S software Methods 1. Card Programming The card method ...

    • LMS Software - Installation Setup

      Please Click Here to download and install KAS LMS software If you are Reinstalling the software please backup your database first  After Installing the LMS software, copy the KAS-LMS (patch) file from the above link and paste into the lock software's ...

    • LMS Software - How To Read The Unlocking Records from LMS Lock

      Reading the Records from an LMS Lock Take the mobile programmer to the lock you wish to collect the records from       1)      Press 2       2)      Press RUN       3)      Hold to lock induction area, you might have to adjust the position of the ...