Platinum Lock (LMS) - How to set the Clock

Platinum Lock (LMS) - How to set the Clock

1) Upload the data from the PC to the handheld programmer Click Here

2)  Proceed to the door lock and Press 1 (Time & Date will display)

3)  Press RUN on the programmer

4)  Hold the programmer against the lock’s induction area

5)  This will beep several times until the time has been set. ‘Download Complete’

6)  Test the issued guest cards are now functioning properly

    • Related Articles

    • Universal (Adel) Lock - Set The Clock

      Create a clock card form the LMS ADEL software.       1) Select ISSUE       2) Select Clock Card *if clock card is not displayed in the drop-down menu please speak to management or contact "KAS"       3) Select OK       4) Place the card over each ...

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Platinum Lock - Drilling Template

      Platinum Drilling Template Speeds up installation time by 50-80%! Suitable for tubular latch or mortise latch 70mm backset only Wraps around the door and clamped in place to easily and quickly mark the drill holes Use the notches on the side to align ...

    • Platinum Lock - Fire Certificates

      Platinum Lock hold the following fire certificates.  KAS recommends you speak to your certifier and supplying them with the relevant certificates before purchasing any hardware  Ecore: Mortise Latch & Tubular Latch Firecore: Mortise Latch & Tubular ...

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...