Lock-S Software - How to set the CLOCK by RFID Card

Lock-S Software - How to set the CLOCK by RFID Card

Issuing a CLOCK card

  1. Open Lock-S Software
  2. Go to Clock Card under Setting Cards
  3. Put a blank card on the card encoder
  4. Click Issue
  5. Swipe the Clock card on the lock once.
Tips:
  1. Ensure the time you have programmed onto the clock card is the same as the current time.
  2. To do this, keep 'System time' checked when issuing a clock card, see below screenshot.




    • Related Articles

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • Universal (Adel) Lock - Set The Clock

      Create a clock card form the LMS ADEL software.       1) Select ISSUE       2) Select Clock Card *if clock card is not displayed in the drop-down menu please speak to management or contact "KAS"       3) Select OK       4) Place the card over each ...
    • Lock-S Software - Set "Auto-Open" time on a Common Door Lock

      Open your KAS Lock-S software and click on data >> common door  Click on the lock that you want to set the "Auto-Open" time for and click edit. Now on the next screen click on the little box that say Auto Open and set your desire time and click Save. ...
    • Platinum Lock (LMS) - How to set the Clock

      1) Upload the data from the PC to the handheld programmer Click Here 2)  Proceed to the door lock and Press 1 (Time & Date will display) 3)  Press RUN on the programmer 4)  Hold the programmer against the lock’s induction area 5)  This will beep ...