ETouch Lock - How to reset the four digit App code?

ETouch Lock - How to reset the four digit App code?

How to Resolve

In the event that you have forgotten your four digit App code.

  1. Delete the App from your mobile device
  2. Reinstall the App on your mobile device
  3. Log-in with the same  "Username", "Mobile number" and "email"
  4. When you get to enter your four digit App code, enter the new code and when prompted re-enter your new code


  1. By deleting and reinstalling your KAS App, none of your Lock's stored setting will be affected
  2. Once signed into the App, you can disable the four digit login step

    • Related Articles

    • Lock-S Manual / User Guide

      Part 1 KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned ...
    • ETouch Lock - Factory Reset

      How to Conduct a Factory Reset Complete the steps to factory reset the master programming code. When the lock will be in factory reset, the management pin code default of ‘123123’. All other programmed data will NOT be deleted. Open the battery cover ...
    • ETouch Lock - Program/Delete Master Programming Code

      How to Program master programming code This is the highest authority and has the ability to open the lock and change/remove any other pin code, card, FOB or remote.  It can only be altered by completing the following step or completing a FACTORY ...
    • ETouch Lock - Series 820~850 Cheat Sheet

      Programming Guide This article is a compacted user guide. Please see full manual for further instructions and information Notes: To wake the etouch series lock you need to tap (wake up) the LED display with the palm of your hand. *[MANAGEMENT PIN ...
    • Platinum Lock - Factory Reset

      By System Card Locate the original System Card used to initially program the door. Note: you cannot use the PDA. Swipe the System Card once -> Red LED with rising tone Swipe the System card again -> Green LED with a single beep The lock is now ...