Universal (Adel) Lock - Erase a Specific Guest Card

1. On the main menu, Select Issue 
   
2. From the drop-down, select Inhibit card
   
3. Now chose the parameters of the card
   

 

1. After the cards are created, you will need to tap this on the room door. 
   
2. The guest card will need to be issued again to work on the lock

• Related Articles

• Universal (Adel) Lock - Full Software Manual

  Please click attached file to download.

• Universal (Adel) Lock - Update the Program Card

  IMPORTANT NOTES BEFORE YOU BEGIN ALWAYS TAKE A BACK UP OF YOU SOFTWARE BEFORE PERFORMING THE BELOW INSTRUCTIONS You may not be able to perform the below steps if you do not have this permission set Use the SYSTEM login credentials or Contact you ...

• Lock-S Manual / User Guide

  KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

• Universal (Adel) Lock - Program as a Room Door

  Instructions please use the following instructions If you need to program an Access Control or Common Door. CLICK HERE When programming a lock the following cards must be issued from the software and taped to the door in this specific order. Create ...

• Universal (Adel) Lock - Set The Clock

  Create a clock card form the LMS ADEL software.       1) Select ISSUE       2) Select Clock Card *if clock card is not displayed in the drop-down menu please speak to management or contact "KAS"       3) Select OK       4) Place the card over each ...