Lock-S Software - How to create a “staff access card” which will only access the common door of the property and the office doors
- Create a staff card
- Enter the credentials
- Select any office doors you wish this card to have access to
- Select any floors that you wish this card to have access to
- Select any common doors you wish this card to have access to
- Issue the card
The staff card will not have the access to any guest rooms
Related Articles
Lock-S Manual / User Guide
KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...Lock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...Universal (Adel) Access Control - Program an Adel Access Control or Universal Lock as a Common Door
Instructions Issue the appropriate cards from the software for the Access Control you want to program. If you need to program room door Click Here The correct cards must be created from the software before you can begin programming the Access ...Neo ACR & Neo Cloud Lock - User Guide for Local Management
Preface Local Management and programming (as per below) are not required if you are managing locks access via the mobile App or via a Web Console. Please Note: Battery operated Neo Locks are not recommended for use as "Common Doors". Get the Free App ...Lock-S Software - Set "Auto-Open" time on a Common Door Lock
Open your KAS Lock-S software and click on data >> common door Click on the lock that you want to set the "Auto-Open" time for and click edit. Now on the next screen click on the little box that say Auto Open and set your desire time and click Save. ...