Ensure you have Bluetooth enabled on your smartphone
Ensure the lock is powered with new batteries. Test it by wake up the keypad.
Login to the mobile app
Select ‘Add Lock’ on the tab bar
Your phone will now search for all available locks/eKeys in your proximity. Select the lock/eKey you would like to add. For example “K121708001”. Use the pull down gesture to refresh the table if you cannot see your deice.
Enter the lock Serial Number and Activation Number found on the outside of the box or on a card inside the eTouch Bluetooth Lock box.
Once successfully paired, you will then be returned to your eKeys list.
Tap the new eKey to enter the eKeys settings where you can rename your lock, control access and other options.
KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
Setup Manager App Account Lock Keeper can be used as a “Manager” or “Admin” app when signed in with the “APP Account” field as displayed on the Lock-S Software. APP Account details can be found in Lock-S Software by ‘System’>’System Parameters’>’APP’ ...
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
Setting up your Neo Cloud Lock/NEO ACR (Access Control Reader) DO NOT SET UP THE DEVICE UNTIL YOU HAVE INITIALISED THE LOCK TO CLOUD MODE Once you have power to the device, it will broadcast the SS number. The lock is in initialisation mode. You will ...
KAS Lock-S Software is a PC Software which allows you effortless control of your electronic lock system in your property. Beta Disclaimer: KAS Integration ToolKit is currently under active development. The Beta labeling implies that while the core ...