Lock-S Software - Difference between "Auto Open" and "Open Time"

Lock-S Software - Difference between "Auto Open" and "Open Time"

Auto Open

  1. The lock will be in 'free passage' between these hours. No card required.
  1. Outside these hours, all valid cards will access the lock

Open Time

  1. The lock will allow all valid card access* between these hours
  1. After this time no card will access the lock

Notes

  1. Both settings can be enabled at the same time.
  2. You can also restrict Staff, HKSP, Master, Office cards in the System > Function Parameters dialogue.



    • Related Articles

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

    • Lock-S Software - Set "Auto-Open" time on a Common Door Lock

      Open your KAS Lock-S software and click on data >> common door  Click on the lock that you want to set the "Auto-Open" time for and click edit. Now on the next screen click on the little box that say Auto Open and set your desire time and click Save. ...

    • Universal (Adel) Lock - Full Software Manual

      Please click attached file to download.

    • Lock-S Software - How to Change the relay 'Unlock' Time on Locks & Access Controls

      Follow this guide to modify the unlocking time for your lock. Note: you must have the following firmware/software versions on all your devices: Lock-S Software: V12.3n Platinum: V9.9 Neo: V6.2 HAR200 / HAR302: V10.0 If you need to upgrade any of your ...