Lock-S Software - Checking Firmware Version of the Locks via PDA

Lock-S Software - Checking Firmware Version of the Locks via PDA

Connect your PDA via USB cable with the PC and click on System >> PDA on the KAS lock-S system software.




Now Click Clear PDA >> Init PDA >> Download Data >> Clock  as shown below in the right order.




Now Disconnect the PDA from the PC and click the button on the side of the PDA to awake the screen.



Click on the Audit on the PDA



Click on the First Query




Now you will see the screen with the little Dialogue box Query as shown below don't press "OK" yet




Now present it on the face of the lock and you will hear a beep with a green led light up on number 7



Now connect your PDA again via USB cable with the PC and click on System >> PDA on the KAS lock-S system software.





Now click on the "Read Log Info"




Now you will be able to see the version of the Firmware of the locks.







    • Related Articles

    • Lock-S Software Neo - Factory Reset

      These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...

    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...

    • Lock-S Program Lock Hardware

      Preface Programming the lock hardware can be completed by either of these 2 methods. Via cards or using the PDA These instructions for the Platinum Lock, Neo Lock and Access Controls on the Lock-S software Methods 1. Card Programming The card method ...

    • Lock-S Software - How to Change the relay 'Unlock' Time on Locks & Access Controls

      Follow this guide to modify the unlocking time for your lock. Note: you must have the following firmware/software versions on all your devices: Lock-S Software: V12.3n Platinum: V9.9 Neo: V6.2 HAR200 / HAR302: V10.0 If you need to upgrade any of your ...

    • Lock-S Software - "Fail to write" PDA error message

      If you are getting the "Fail to write" message, this may indicate the PDA has not been configured correctly for the site software. Please try the following: Plug PDA into the computer through supplied USB->USB micro cable Click System>PDA from top ...