ETouch Lock - Can I Manage the Lock using Two Admin Accounts?
You can only manage the eTouch lock using one admin account.
Also if you have activated the lock on one admin, you do not need to activate the lock again on another phone. You only need to activate the lock once.
If you think having multiple admin accounts will be useful, put your comments below. KAS are considering this for future app updates.
Related Articles
Lock-S Manual / User Guide
KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
Lock-S Software Neo - Factory Reset
These Instructions are only for the Neo Lock when managed from the Lock-S software. Please revisit the knowledge base if you are looking for instructions on the Standalone/ Cloud-managed Neo Lock By System Card - Hotel mode only you cannot use the ...
ETouch Lock - Factory Reset
How to Conduct a Factory Reset Complete the steps to factory reset the master programming code. When the lock will be in factory reset, the management pin code default of ‘123123’. All other programmed data will NOT be deleted. Open the battery cover ...
ETouch Lock - Series 820~850 Cheat Sheet
Programming Guide This article is a compacted user guide. Please see full manual for further instructions and information Notes: To wake the etouch series lock you need to tap (wake up) the LED display with the palm of your hand. *[MANAGEMENT PIN ...
ETouch Lock - Unlock using RFID Keycards or FOBs
Unlock with RFID key cards or Fobs The E Touch Bluetooth Lock can be unlocked using RFID key cards or Fobs. It does not have the RFID antenna ON when the door is in standby. You have to touch the keypad to wake up the lock out of standby. Conduct ...