Platinum Lock (SAL) - Installation

Platinum Lock (SAL) - Installation


    • Related Articles

    • Platinum Lock (SAL) - User Guide

      Preface The SAL Platinum electronic lock is a standalone card operated lock. It does not require any software or supporting hardware to operate. OPERATIONS The unlocking modes available;   RFID Mifare S50 1K Mechanical Key for emergency access or ...
    • Lock-S Manual / User Guide

      KAS Lock-S Hotel Card Lock Software Module Introduction The KAS Lock-S Software must be activated with Serial number and Product ID. The authorized client must safeguard the unique Product ID assigned. An authorized person should be assigned to take ...
    • Platinum Lock - Drilling Template

      Platinum Drilling Template Speeds up installation time by 50-80%! Suitable for tubular latch or mortise latch 70mm backset only Wraps around the door and clamped in place to easily and quickly mark the drill holes Use the notches on the side to align ...
    • Platinum Lock - Fire Certificates

      Platinum Lock hold the following fire certificates.  KAS recommends you speak to your certifier and supplying them with the relevant certificates before purchasing any hardware  Ecore: Mortise Latch & Tubular Latch Firecore: Mortise Latch & Tubular ...
    • Platinum Lock (LMS) - Hardware Installation Video

                        1) By default, the lock is permanently in an unlocked (“open”) state. This is factory default, which means the installer can never lock himself/herself out whilst installing. 2) Remove all existing door hardware and cut the door to ...