Putting the Lock in Free Passage Mode Using the Keypad

Free Passage Mode

Free Passage Mode will leave the door in an “unlocked” state until mode is deactivated. Free Passage Mode allows access through the door without the need for an eKey, pin code, key card/FOB or remote.

NOTE: If the lock is left in Free Passage Mode for a long period of time it will significantly decrease battery life.

Activating/ Disabling Free Passage Mode

  1. Enter “Program Management Mode”
  2. Press “ 6 “, then press ” * “
  3. Setting complete. Press ” # ” to exit or wait for auto power off

Free Passage Mode Duration

  1. Enter “Program Management Mode”
  2. Press “ 7 “, then press ” * “
  3. Enter the duration in minutes up to 999 mins..ie 001= 1 min, 060 = 60mins
  4. Setting complete. Press ” # ” to exit or wait for auto power off

Was this article helpful?

Related Articles

Leave A Comment?