How to Program the Lock Using the Keypad

Unlock the door by pin code

Unlock the door by pin code Touch keypad to wake up, Enter pin code [4-6] digits, Press ‘*’, Door will unlock.

Example: “ 1 2 3 4 5 6 * “

Example: “ 2 3 4 5 * “

For more info: Download the manual here

 

Programming the Master Code

Master Code is used as the 6 digit programming code to change any lock settings. Master code will also open the door. Default: “123456”, must be 6 digits only.

Example: “ * 1 2 3 4 5 6 * 0 * 2 2 3 3 4 4 * “

This has modified your Master Code to “ 2 2 3 3 4 4 “

 

User Pin Codes

Pin Codes can be set for any user wanting to access the door by entering a Pin Code in the lock keypad. User Pin Codes can be from 4 to 6 digits long and must be unique.

Add User Pin Code

Pin Codes can be set for any user wanting to access the door by entering a Pin Code in the lock keypad. Must be 4 – 5 digits. Capacity: 29.

Example: “ * <Master code> * 1 * 2 3 4 5 * “

This has created a new pin code with value ” 2 3 4 5 “.

 

Delete ALL User Pin Codes

This deletes ALL User Pin Codes except the Master Code. Please use the Bluetooth App to delete individual User Pin Codes.

Example: “ * <Master code> * 2 * * ”

 

Key Cards and FOBs

A Key Card or FOB can be programmed for any user wanting to access the door by swiping a card/FOB at the lock face. You can issue up to 30 Key Cards or FOBs.

Unlock the door by RFID Card or FOB

a. Touch keypad to wake up, Press ‘#’, Swipe RFID Tag.
b. A beep will sound, motor engages. Now rotate handle to open the lock.

 

Add Master RFID Card or FOB

Master RFID Card or FOB is programmed for usage when the door lock is in “Schedule” mode which is set by Bluetooth app. Capacity: 1.

a. Enter “Programming Mode” Press “3″, then press ” * ” .
b. Swipe the RFID tag you wish to program as Master.

Example: “ * <Master Code> * 3 * <swipe card> ”

3 beeps: unsuccessful
1 long beep: successful setting

 

Add User RFID Card or FOB

User RFID Card or FOB can only be programmed by this method. To add an additional User RFID Card or FOB, you have to repeat this setting again. Capacity: 30.

a. Enter “Programming Mode” Press “4″, then press ” * ”
b. Swipe the RFID tag you wish to program as a user.

Example: “ * <Master Code> * 4 * <swipe card> ”

3 beeps: unsuccessful, or user card is already programmed
1 long beep: successful setting

 

Delete Key Cards or FOBs

Delete ALL User AND Master RFID Cards and FOBs. Please use the Bluetooth App to delete individual User RFID Cards and FOBs.

a. Enter “Programming Mode” Press “5″, then press ” * ” twice.

Example: “ * <Master code> * 5 * * ”

3 beeps: unsuccessful
1 long beep: successful – All cards removed

Was this article helpful?

Related Articles

Leave A Comment?