Changing Lift Floor Control – With the Lift Running Card

This function allows you to control the floors an operator or guest has access to.

  • Free Floor – *This is noted in the software as Pink Box
    • Allows any lift user access to the floor. eg Ground Floor and/or Basement etc
  • Controlled Floors –*This is noted in the software as White Box
    • Only appropriate cards/ credential holder will have access to this floor. eg Guest Room Floors

Process

  1. On the top drop-down menu: Lift System Management  > Make Lift Running Card. 
  2. You will see all the floors available to control.
    • Double click on the floor numbers you want to have free and controlled
      • Free Floor – *This is noted in the software as Pink Box
      • Controlled Floors –*This is noted in the software as White Box
  3. Once you have selected your controlled & free floors select Issue Card
  4. Take this card and tap it on the lift. The reader will sound an alert to say the update has been completed

Helpful Hint

  • You can create multiple Lift Running Cards for different access when required and leave in a safe place
    • Make sure you label the cards appropriately
    • Just tab the card over the reader to alternate between the different Lift Running Cards
  • These cards do not expire. You can delete from the software or re-write on them

Was this article helpful?

Leave A Comment?